Hold
Words
694 words
Reading time
Class: HoldDrop.cs
Method:
Judge(float currentSec)(inherited from NoteDrop.cs)HoldEndJudge(float currentSec)(inherited from NoteLongDrop.cs)HoldClassicEndJudge(float currentSec)(inherited from NoteLongDrop.cs)
Head Judgment
The head judgment of a Hold is identical to the Tap judgment. See the Tap page.
Press Judgment
INFO
- Press judgment only runs in the Modern judgment mode
- Note that the press check and the head judgment are not serial: the press check also runs before a head result has been obtained
Behavior
- Press judgment ignores the first
6fand the last12f - The press check starts at frame 7
- Releasing has a
2ftolerance - The Hold duration is corrected according to the head judgment:
- A Fast head judgment does not correct the Hold duration
- A Late head judgment subtracts
_judgeDifffromLength - If the corrected duration is
18for less, no end judgment is performed and the final result is the head judgment
Details
INFO
For convenience, p below denotes the "Hold completion ratio":
- p >= 1
- A head judgment of
Great 2nd/3rdis corrected up toGreat - A head judgment of
Goodis corrected up toGreat - A head judgment of
Missis corrected up toGood - Other grades are not modified
- A head judgment of
- p >= 0.67
- A head judgment of
Criticalis corrected down toPerfect 2nd - A head judgment of
Great 2nd/3rdis corrected up toGreat - A head judgment of
Goodis corrected up toGreat - A head judgment of
Missis corrected up toGood
- A head judgment of
- p >= 0.33
- A head judgment higher than
Greatis corrected down toGreat - A head judgment of
Great 2nd/3rdis corrected up toGreat - A head judgment of
Goodis corrected up toGreat - A head judgment of
Missis corrected up toGood
- A head judgment higher than
- p >= 0.05
- A head judgment higher than
Goodis corrected down toGood - A head judgment of
Missis corrected up toGood
- A head judgment higher than
- p >= 0
- A head judgment higher than
Goodis corrected down toGood
- A head judgment higher than
End Judgment
INFO
The end judgment only runs in the Classic judgment mode.
WARNING
MajdataPlay's end judgment is not backed by any public data. All values are LeZi's estimates based on their own understanding of maimai FiNALE.
Behavior
- The end judgment has no tolerance
- Unlike press judgment, the end judgment is based on the difference between the release time and the Hold end time
- It only has Perfect and LateGood grades, and the Fast and Late windows are not fully symmetric
- When the Hold has ended but the held time exceeds
20f(CLASSIC_HOLD_ALLOW_OVER_LENGTH_SEC), the Hold forcibly performs the end judgment
Details
| Grade | Range | Total |
|---|---|---|
| FastGood | (-inf, -9f) | - |
| Perfect | [-9f, 12f] | 21f |
| LateGood | (12f, 20f] | 8f |
Special Behavior
Mine
A Mine does not need to be hit — leaving it alone is the correct action. When a Hold is flagged as Mine:
- Safe pass: the player never touches it;
MineHeadCheck()auto-judgesPerfectwhenGetTimeSpanToJudgeTiming() > 3f, plays the hold effect and marks the press state - Accidental hit: the player touches it within the judgeable window;
HeadCheck()judges normally then corrects:JudgeResult >= Perfect(Fast side) →TooFast,JudgeResult < Perfect(Late side) →Miss, followed byisMineForceEnd = trueand an immediateEnd() - Press check: after the safe pass,
MineBodyCheck()checks every frame whether the button or sensor isOn— if a press is detected, it forcesMissandEnd()
Differences:
| Item | Normal Hold | Mine Hold |
|---|---|---|
| Judgeable window | [-9f, 9f] | [-3f, 3f] (narrowed to TAP_JUDGE_SEG_3RD_PERFECT_MSEC) |
| Safe pass | None | Perfect at > 3f |
| Accidental hit result | Normal judgment | TooFast / Miss |
| Press judgment | Normal | Skipped (BodyCheck() returns immediately when IsMine is true) |
| End judgment / press-ratio correction | Normal | Skipped (End() skips HoldEndJudge / HoldClassicEndJudge when IsMine is true) |
| Autoplay | Normal | Disabled |
Judge Style Conversion
The final result goes through the same ConvertJudgeGrade conversion as Tap. See the Tap page.